Requirement:
Small frame, maximum toughness, crashproof construction, mid range with good signal penetration.
- M240 glassfiber frame with 4mm thick arms
- DYS 1806 2300kv motor
- Rctimer Argonaut 20A Blheli esc
- 5×3 nylon prop
- Naze32 acro FC
- 2.4G Frsky D4R-II receiver
- MC900-V9 520TVL fpv camera
- Surveilzone 1.3G 200mW vTX
- Zippy 1500mAh 25C 3s battery
- AUW 460g
Practice with the quad:
Status: retired (sold)
Amanda
Hi,
This is Amanda, we are specializing in brushless motor, ESC and some of other multicopter spare parts.
we launch a new 2205 motor with the strong perfermance, it have beat some well-know brand, it’s more better for racing. I would like to introduce some feature to you,
Key Feature: 18pcs cooling and 2.0mm magnet
Configu ration:12N14P
No.of Cells(Lipo):3-5S
Rotor: N52H arc magnets
Wiring config Single-stranded :
2300KV = 1 x 0.45mm 11 turns Delta DLRK
Stator: 0.15mm Kawasaki silicon steel
Bearings: Japanese NSK
Base casing: Al 7075
Bell cap:Al 7075
Weight: 27.8G
Any response will be appreciated