There is still a need to increase the angle so I see the upper parts of the trees during fast proximity flight. I am…Leave a Comment
For vTX I used the Aomway 200mW 5.8G device with CP antenna.Leave a Comment
After a long journey, I came to the point so I can finally state, that the project is finished and successful. For this, I had…Leave a Comment
Yesterday I did the first airborne test with the Surveilzone’s Starlight camera (CC1564). The result is still not satisfying, although much better than with the…Leave a Comment
The Starlight camera finally arrived so I could do the ground tests. The camera is said to be as sensitive as 0.00008 LUX and capable…Leave a Comment
By the evening, I powered the quad in the garden and finally get the DIY IR illuminator module airborne. A LOS flight by the evening…Leave a Comment
While I am still waiting for some fpv components to arrive, I have finished the driver for the IR illuminator and packed it together with the IR leds. For now, I decided to mount the whole pack in top of the battery, until it will be thoroughly tested. Of course the IR leds are not protected well enough this way, so I will try not to crash the copter during the tests.